Upflow
Drying/Packed Bed
In
the real world, air demand fluctuates. Sometimes
compressors are turned off on Friday. Over
the weekend, your air system loses pressure.
Turn on the compressors Monday morning and the velocity through a
dryer is high enough to pulverize the desiccant.
Competitors tell you to slowly pressurize the system to avoid
desiccant fluidization. Right.
At
SAHARA, we designed the T Series to operate in the real world.
Packed desiccant beds allow the T to operate at 0 to 100% flow;
full line pressure or no line pressure. You
don’t have a problem downstream with a T.
Heat
of Adsorption
All
dryer manufacturers make claims about dryer efficiency.
Everyone talks about the esoteric theories of heat of adsorption,
some even give you obscure formulae. In
the real world, what counts is the bottom line and that’s performance.
The T Series Heatless air dryer gives you the specified dewpoint with the minimum
amount of purge. Guaranteed.
Our exclusive control system
for the T Series Heatless air dryer, standard with Models T-150 and smaller, provides unequaled benefits,
economic value, and reliable printed circuit board technology. The T Series
Deluxe Controller gives you the knowledge and information you need to keep
your critical air system operating at peak efficiency.
Our
exclusive control system for the T Series Heatless air dryer, standard
with Models T-200 and larger, provides added performance, versatility, and
control using the Allen-Bradley Micrologix Programmable Logic Controller
(PLC) with the Panel-view 300 operator interface panel.
Mufflers
Heatless
dryers are by nature noisy. Every
few minutes, the valves shift and one tower depressurizes.
There’s no way you can disguise this blast of air.
We understand the concern about noise levels in the workplace and
provide mufflers that are specifically designed for dryer service.
In the real world, mufflers eventually get clogged up with
desiccant dust, reducing the efficiency of the dryer.
The T Series Heatless air dryer is equipped with a
failure-to-depressurize alarm that will alert you to change your mufflers
and/or check for valve leakage. You
get better performance and a quieter environment.
Valves
One
of the reasons dryers are purchased is to help pneumatic valves work
properly downstream; but what about the valves on the dryer?
They shift every few minutes and often see wet, oily air.
Making the valves on the dryer perform consistently is one of the
toughest tasks faced by a dryer manufacturer.
We used the knowledge gained during the past 40 years to design and
utilize the most reliable valves possible.
In the real world, we know that components fail; usually on the
weekend when you’ve got much better things planned.
We understand this and designed the T Series to utilize the most
reliable valves on any dryer in the world.
High performance 2-way valves are non-lubricated and maintenance
free.
5
Year Warranty
In
the real world, nothing works forever and nothing lasts forever.
The T Series Heatless air dryer comes pretty close.
While we can’t promise that nothing will ever fail, we can give
you an extended warranty. Simply
perform annual preventative maintenance and we’ll extend the materials
warranty for up to 5 years. You do
the work, you deserve the reward. At
SAHARA, we understand that our business relationship is a partnership; we
both work together to keep your plant air system up and running.
Minimum downtime, minimum cost, for maximum benefits. Giving
you peace of mind. We know your
time is valuable; spend it with your family, not servicing a dryer. |
